-
Dry Diamond Polishing drums made to the same specification as our Super Premium Dry polishing pads, M14 Thread.
-
Velcro backed diamond resin floor polishing pads for Marble. Ideal for use under larger rotary machines for existing marble floor polishing and restoration. 100mm x 10mm thick designed for wet use only. Value for money combined with a quality polish. The set of 7 pads is supplied with one pad from each grit level.
-
Ideal for use on Granite and harder marbles. Specifically designed to be used dry with the distinctive honeycomb pattern.
-
Designed for wet use on polishing machines or variable speed angle grinders in combination with a backer pad at speeds less than 4500rpm. This is an ideal set for a one off job or for infrequent users.
-
ATS rigid sponge restoration, repolishing pads, velcro backed.
-
Available in 75mm (3") 100mm (4") or 125mm (5"). Quality rubber backer pad with brass threaded M14 centre.
-
Solid Aluminium Backer pad with velcro face and M14 thread. Available in the following sizes: 100mm (4"), 125mm (5"), 150mm (6"), 175mm (7")
-
Felt polishing mop M14 fitment. 125mm diameter, 25mm thickness.
-
125mm Moss type PSA backing pad for paper silicon carbide discs. Medium/Hard density with centre hole for water feed.
-
Medium density PSA or Velcro backing pad ideal for use with SAIT Silicon Carbide discs. M14 thread, long lasting with a hard wearing polyurethane foam. Use with spray adhesive to attach the plain paper disc (PSA Backer). Use in conjunction with the velour backed pads (Velcro Backer).
-
Aluminium bodied snail lock backer with brass M14 threaded centre and rubber damping designed to convert our snail lock edge polsihing pads for use on a conventional hand held polisher. Available in 100mm or 125mm Granite Polishing Pads Marble Polishing Pads Quartz Polishing Pads
-
Convert your velcro backed polishing pads for use with our Aluminium Snail lock backer. Saves pulling off and reapplying the polishing discs from a velcro backing and creates a solid flat platform for each pad. Available in 100mm or 125mm
-
Convert any M14 female fitting to an 8mm Hex shaft for use in a standard drill chuck. Ideal for converting polishing pad backers for use in drills.
-
Metal bonded diamond, resin filled for a smoother action Ideal for rapid stock removal on all kinds of stone, natural and man made. Also useful for smoothing the surface of concrete. Available in two levels of grit at 100mm with an M14 thread.
-
Metal bonded diamond, alumnium backed to make the cups light weight and easier on the operator. Ideal for rapid stock removal on all kinds of stone, natural and man made. Also useful for aggregate removal on the surface of concrete worktops. Available in three levels of grit all with an M14 thread.
-
Single row concrete diamond grinding cup wheel with an M14 threaded centre fitting to screw straight on to your angle grinder/polisher.
-
For use in mechanical edge polishing machines or floor polishing machines with fitment designed to accept snail lock backed pads. 5mm thickness of resin bonded diamond with a rubber cushion between the polishing head and backer to absorb vibration. We also offer an M14 to Snail Lock backer to convert the 100mm pads for use on standard hand held polishers. Available in 100m or 125mm.
-
Wet Diamond Polishing drums made to the same specification as our Premium Wet polishing pads. M14 female thread to attach directly to your polisher, ideal for finishing the inside of undermounted sink cuts outs. Water holes and channel through the drum allowing use of a centre feed wet polisher. 50mm diameter, 40mm high on a hard rubber drum. Granite Polishing pads Diamond Polishing Pads Granite Tools Stone Tools
-
These are the same pads as our 100mm Premium Dry diamond Polishing pads but produced in a shape to fit Oscillating multi tools. Velcro backed and designed to be used dry only.
-
Single row concrete diamond grinding cup wheel with a centre bore of 22.23mm to bolt straight on to your angle grinder.
-
Double row concrete diamond grinding cup wheel with an M14 threaded centre fitting to screw straight on to your angle grinder/polisher.
-
Double row concrete diamond grinding cup wheel with a centre bore of 22.23mm to bolt straight on to your angle grinder.
-
Vacuum Brazed Diamond Grinding discs ideal for surface removal of dense or abrasive products such as natural stone or concrete. Hook & loop backed.
-
Electroplated diamond polishing/grinding pads.
-
Velcro backed metal bonded grinding discs at an economic price. Designed for granite, marble, limestone and other natural stones. Available in #30, #50 & #100 These will work on concrete and other abrasive materials but with a shortened lifespan. The set of 3 is one disc of each grit.
-
115mm with a 22.23mm centre bore to fit angle grinders and polishers.
-
Turbo X designed Diamond Blade for angle grinders particularly for cutting hard material such as porcelain, hard ceramics and quartz. Only 1.2mm thick and with a 10mm high segment giving fast clean cutting and a long life. Available in 115mm and 125mm.
-
Turbo flange diamond blade specifically for cutting porcelain tiles, very hard ceramic tiles or quarry tiles. Also cuts man made quartz and engineered stone very nicely.
-
Vacuum brazed diamond cut & grind flush cut blade.
-
Trapezoid and cone countersinks available in two sizes and two levels of grit. Both with M14 fittings designed to fit on to variable speed polisher/grinders. #36 – Coarse – ideal for stone or if you need to remove a lot of porcelain #50/60 – Medium – For smoother applications on stone and porcelain with more […]
-
Vacuum brazed diamond grinding countersink bits with a hex shank.
-
Vacuum brazed diamond grinding finger bits with an M14 thread. 10mm or 20mm diameter.
-
Polish or clean your worktop drainer grooves with these easy to use diamond hand pads.
-
Vacuum brazed diamond zero tolerance drums for squaring up the edge of worktops and sink cut outs. M14 fitment.
-
SAITSCREEN 407mm Abrasive screens impregnated with silicon carbide.
-
SAITRON semi-rigid silicon carbide discs for use on an angle grinder in combination with a backing pad.
-
SAITRON semi-rigid silicon carbide discs for use on an angle grinder in combination with a backing pad.
-
Backer bad for Saitron fibre backed discs, M14 threaded centre flange. 117mm to fit 125mm discs. 172mm to fit 178mm discs.
-
Silicon Carbide cup wheels made up of a solid block of SiC bonded together by Bakelite resins with an M14 fitting incorporated into the block itself.
-
115mm or 125mm Crack Chasing blade for angle grinders, 6.4mm or 9.5mm thick.